40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  Coating Ring-down Measurement Lab elog  Not logged in ELOG logo
Message ID: 242     Entry time: Tue Dec 13 11:42:52 2016
Author: Gabriele 
Type: General 
Category: General 
Subject: Steve Penn's model of loss angle 

The plot below shows the best loss angle we expect foer our samples, based on Steve Penn's model of surface and volume losses (Phys. Lett. A 352, 3). That paper contains data only for Suprasil 2 and Suprasil 312, so it might be a bit wrong for our Corning 7980. The two experimental data sets are for samples that have been laser polished.

ELOG V3.1.3-