40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  Coating Ring-down Measurement Lab elog  Not logged in ELOG logo
Message ID: 233     Entry time: Wed Dec 7 08:48:13 2016
Author: Gabriele 
Type: Electronics 
Category: Configuration 
Subject: Auto center state written directly to data 

I modified the autocenter script. Now while the picomotor is moving, the variable X3:CR1-AUTOCENTER takes the value 1, otherwise it is 0.

ELOG V3.1.3-