ID |
Date |
Author |
Type |
Category |
Subject |
Text |
 |
|
305
|
Sat Feb 9 13:32:07 2008 |
John | Summary | SUS | All watchdogs tripped | When I arrived this afternoon the watchdogs
had tripped on all optics. I reset them and
enabled the coil currents.
|
|
|
306
|
Sun Feb 10 20:47:01 2008 |
Alan | Summary | SUS | All watchdogs tripped | A moderate earthquake occurred at 11:12:06
PM (PST) on Friday, February 8, 2008.
The magnitude 5.1 event occurred 21 km (13 |
|
|
307
|
Sun Feb 10 21:43:16 2008 |
rob | Configuration | IOO | MC alignment tweaked |
I adjusted the alignment of the free hanging
mode cleaner to best transmit the PSL beam. |
|
|
308
|
Mon Feb 11 14:24:19 2008 |
steve | Update | PEM | more earthquakes | ITMX and ITMY sus damping restored after Baja
earthquake 5.1 mag at 10:29 this morning.
|
|
|
309
|
Mon Feb 11 22:44:29 2008 |
rob | Configuration | DAQ | Change in channel trending on C1SUS2 |
I removed the MC2 optical lever related channels
from trends, and the SRM POUT and YOUT (as |
|
|
310
|
Tue Feb 12 13:53:27 2008 |
rob | Omnistructure | VAC | Return of the RGA |
The new RGA head was installed a few days
ago. I just ran the [B]RGAlogger[/B] script |
|
|
311
|
Tue Feb 12 16:18:29 2008 |
rob | Configuration | Computer Scripts / Programs | autoburt cron moved to op340m |
I moved the autoburt cron job from op440m
to op340m. For some reason, [B]burtrb[/B] |
|
|
312
|
Tue Feb 12 16:34:07 2008 |
rob | DAQ | DMF | seisBLRMS 1.1 |
The compiled version of seisBLRMS had been
running ~2 weeks without crashing as of last |
|
|
313
|
Tue Feb 12 16:39:52 2008 |
rob | Update | Locking | report |
Did some locking work on DRFPMI on sunday
and (with John) on monday nights. So far |
|
|
314
|
Wed Feb 13 11:41:00 2008 |
Alberto | Update | Electronics | Some characterization of the RF Monitor Box (StocMon) | I'm attaching a table with some measurements
and the power spectrum from the pd to help
evaluate the numbers.
|
|
|
315
|
Wed Feb 13 20:37:11 2008 |
John | Update | LSC | Fibre locking - Fiber | Sam and I observed fringes in the light reflected
from the Y arm. These fringes are due to
the sidebands and not the carrier. To improve |
|
|
316
|
Thu Feb 14 15:04:53 2008 |
rob | DAQ | DMF | DMF delay |
Sometime ago I edited seisBLRMS to keep of
track of how long it was taking to write |
|
|
317
|
Thu Feb 14 15:05:18 2008 |
rob | DAQ | DMF | seisBLRMS 1.1 |
>
> Also, for reasons of aesthetics, I changed |
|
|
318
|
Thu Feb 14 17:21:53 2008 |
Max Jones | Update | Computers | Noise budget code changes | In cvs/cds/caltech/NB/matlab/utilities/LSCmodel.m
at line 146
I have hardwired in changes to struct lsc. |
|
|
319
|
Fri Feb 15 10:28:44 2008 |
rana | Update | Computers | Noise budget code changes | [quote]In cvs/cds/caltech/NB/matlab/utilities/LSCmodel.m
at line 146
I have hardwired in changes to struct lsc. |
|
|
320
|
Fri Feb 15 22:16:04 2008 |
Andrey | Update | Computers | MATLAB is not working: "Licence checkout failed" |
For some unknown to me reason,
|
|
|
321
|
Mon Feb 18 12:04:39 2008 |
Alberto | Update | Electronics | RF Monitor (StocMon) | I put the amplifiers next to the monitor on
the PSL table, layed the power and the RF
SMA cables out to the rack. I'm powering |
|
|
322
|
Tue Feb 19 10:14:13 2008 |
steve | Update | VAC | rga logging needs help | The rga head and controller are running fine,
but the data logging is not. |
|
|
323
|
Tue Feb 19 15:21:47 2008 |
Andrey | Update | SUS | Earthquake tripped watchdogs in ETMY, ITMY |
According to the web-page http://earthquake.usgs.gov/eqcenter/recenteqsus/Quakes/ci14351140.php
,
|
|
|
324
|
Tue Feb 19 18:28:41 2008 |
John | Update | PEM | More seismic in Baja California | Steve spotted more activity from the same
quake.
|
|
|
325
|
Wed Feb 20 11:34:17 2008 |
steve | Update | PSL | laser head temp is up | MOPA head temp is running at 20.3C now
Nomally it is at 18.5C |
|
|
326
|
Wed Feb 20 16:24:37 2008 |
steve | Update | PSL | the laser is recovering slowly | Head temp is still 20.5C and decreasing slowly.
Power output 2.9W
NPRO power 22 mW is increasing as head is |
|
|
327
|
Thu Feb 21 09:56:26 2008 |
steve | Update | PSL | the laser is back | The laser and the psl recovered.
The water chiller temp is 19.98C and head
temp 18.4C
|
|
|
328
|
Thu Feb 21 18:29:28 2008 |
John | Summary | General | HP Network Analyser Analyzer | The HP 4195A network analyser may be broken,
measurements below 150MHz are not reliable.
Above 150MHz everything looks normal. This |
|
|
329
|
Thu Feb 21 19:55:46 2008 |
rana | Update | Electronics | 2 BNC Cables, 1 Tee | I'm not sure where [COLOR=purple]Ward and
Miller went to Analyzer school[/COLOR], but
it was probably uncredited.
|
|
|
330
|
Fri Feb 22 02:51:20 2008 |
Andrey | Update | PEM | Accelerometer ITMX seems to be broken |
As people probably know,
|
|
|
331
|
Fri Feb 22 08:29:07 2008 |
Alberto | Update | Electronics | RF Monitor (StocMon) | [quote]I put the amplifiers next to the monitor
on the PSL table, layed the power and the
RF SMA cables out to the rack. I'm powering |
|
|
332
|
Fri Feb 22 08:33:18 2008 |
Alberto | Update | Electronics | RF Monitor (StocMon) | [quote]I put the amplifiers next to the monitor
on the PSL table, layed the power and the
RF SMA cables out to the rack. I'm powering |
|
|
333
|
Fri Feb 22 11:11:00 2008 |
rob | Update | Electronics | REFLDD problem found |
I used a network analyzer that actually works
to find a problem in the REFLDD electronics |
|
|
334
|
Fri Feb 22 11:13:15 2008 |
rob | Update | Electronics | RF Monitor (StocMon) | [quote] It took some times because the written
procedure to start the chiller is not very
precise.[/quote]
|
|
|
335
|
Fri Feb 22 14:45:06 2008 |
steve | Update | MOPA | laser power levels |
At the beginning of this 1000 days plot shows
the laser that was running at 22C head temp
|
|
|
336
|
Fri Feb 22 15:16:33 2008 |
Andrey | Update | PEM | ITMX Accelerometer is NOT broken |
As I wrote in message 330, there was a bad
signal from ITMX accelerometer. I have found |
|
|
337
|
Fri Feb 22 16:47:54 2008 |
rob | Update | Electronics | Baloney | Well I guess Rana didn't study too hard at
Professor School, either. If he'd even bothered
to actually read John's entry, he might have |
|
|
338
|
Fri Feb 22 20:42:44 2008 |
Andrey | Summary | Computer Scripts / Programs | It seems I succeeded in theoretical simulations |
I am pretty happy at this moment.
|
|
|
339
|
Fri Feb 22 21:19:38 2008 |
Andrey | Bureaucracy | Computer Scripts / Programs | MDV library does not work at "LINUX 2" |
While working on Thursday evening with Matlab
scripts "dttfft2" and "get_data", I noticed |
|
|
340
|
Sun Feb 24 10:51:58 2008 |
tf | Frogs | Environment | 40m in phdcomics? | [url=http://www.phdcomics.com/comics/archive.php?comicid=977][img]http://www.phdcomics.com/comics/archive/phd021308s.gif[/img][/url] |
|
|
341
|
Tue Feb 26 20:24:04 2008 |
Andrey | Summary | TMI | Sorrow | As for that plot of three-dimensional surface,
I indeed was wrong with the axis "Q_ETMX-Q_ITMX"
(I put there wrong string "Q_ITMX-Q_ETMX"). |
|
|
342
|
Wed Feb 27 22:05:03 2008 |
John | Update | LSC | Auxiliary locking | A summary of the status of the auxiliary arm
locking effort.
|
|
|
343
|
Thu Feb 28 12:31:33 2008 |
rob | Bureaucracy | Computer Scripts / Programs | MDV library does not work at "LINUX 2" | [quote]
While working on Thursday evening with Matlab
scripts "dttfft2" and "get_data", I noticed |
|
|
344
|
Thu Feb 28 13:04:59 2008 |
rob | Update | VAC | rga logging working again | [quote]The rga head and controller are running
fine, but the data logging is not.[/quote]
|
|
|
345
|
Thu Feb 28 16:19:37 2008 |
josephb | Configuration | Computers | Mafalda rewired and multiple cameras running | 1) Mafalda is now connected via an orange
Cat5E ethernet cord to the gigabit ethernet
switch in rack in the office space. It |
|
|
346
|
Thu Feb 28 19:37:41 2008 |
rob | Configuration | Computers | multiple cameras running and seisBLRMS | [quote]1) Mafalda is now connected via an
orange Cat5E ethernet cord to the gigabit
ethernet switch in rack in the office space. |
|
|
347
|
Thu Feb 28 19:49:21 2008 |
rob | Update | Electronics | RF Monitor (StocMon) |
[quote]
With Ben, we hooked up the RF Monitor box |
|
|
348
|
Fri Feb 29 13:51:17 2008 |
John | Summary | LSC | PD6 response | I checked the response of PD6 using the AM
laser. It looks happy enough.[IMG]elog:348/1[/IMG]
|
|
|
349
|
Sun Mar 2 23:43:45 2008 |
rana | HowTo | LSC | PD6 response | John's PD plotting script is superior to all
of the ones we had before; lets make him
post the script so we can all use it.
|
|
|
351
|
Mon Mar 3 09:25:33 2008 |
steve | Update | VAC | rga scan logging is working now | [quote][quote]The rga head and controller
are running fine, but the data logging is
not.[/quote]
|
|
|
352
|
Mon Mar 3 13:58:10 2008 |
steve | Update | Computers | RFM Network are down | The CODAQ_RFNETWORK are down, except C1SUSVME
& AWG |
|
|
353
|
Mon Mar 3 19:34:40 2008 |
rana | Update | Computers | RFM Network are down | [quote]The CODAQ_RFNETWORK are down, except
C1SUSVME & AWG[/quote]
All of the FE machines were found to be down |
|
|
354
|
Tue Mar 4 00:42:51 2008 |
rana | Update | Computers | FB0 still down ? | The framebuilder is still down. I tried restarting
the daqd task and resetting the RFM
switch like it says in the Wiki but it still |
|
|
355
|
Tue Mar 4 10:08:21 2008 |
rob | Update | Computers | green lights unreliable when c0daqctrl down |
So far I've tried powering off the framebuilder,
power-cycling the RAID (it was showing an |
|