40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log, Page 156 of 344  Not logged in ELOG logo
ID Dateup Author Type Category Subject Text Attachments
  7798   Fri Dec 7 19:24:43 2012 Den, AyakaUpdateSUSoplevs as acoustic and seismic noise couplers at high frequenciesWe've provided acoustic excitation using
speakers on the AS table and saw that PSD
of YARM feedback signal increased in the
 IMG_0111.JPGIMG_0112.JPGETMY_olreso_copy.pngYARM.png 
  7799   Fri Dec 7 20:34:31 2012 AyakaUpdateSUSoplevs as acoustic and seismic noise couplers at high frequenciesI will
just leave the picture of spectrum that shows
the injected acoustic sound effects due to
 YARM_acous_oplev.pdf 
  7800   Sat Dec 8 04:12:38 2012 DenUpdateLSCprcl Today I wanted to check that AS and
REFL beams are real and contain proper information
about interferometer. For this I locked YARM
 IMG_0118.JPG 
  7801   Sun Dec 9 01:21:51 2012 DenUpdateLSCbeam inside DRMI is clipping on PR3 Tip-Tilt

    

       
            
 6x 
  7802   Sun Dec 9 17:51:53 2012 ranaUpdateLSCbeam inside DRMI is clipping on PR3 Tip-Tilt 
 Some explanation of how you
define power buildup please. Also some plots
  
  7803   Mon Dec 10 03:02:03 2012 DenUpdateLSCbeam inside DRMI is clipping on PR3 Tip-Tilt

    

       
            
 PRCL_LOCK.png 
  7804   Mon Dec 10 10:13:41 2012 DenUpdateLSCbeam inside DRMI is clipping on PR3 Tip-Tilt 
That's OK, but its best to use standard
notation. The power recycling gain is defined
  
  7805   Mon Dec 10 16:28:13 2012 jamieOmnistructureComputersprogressive retrieval of online data now possible with the new NDS2 clientLeo fixed an issue with the new nds2-client
packages that was preventing it from retrieving
online data.  It's working now from
  
  7806   Mon Dec 10 22:34:34 2012 DenUpdateLSCbeam inside DRMI is clipping on PR3 Tip-Tilt

    

       
            
 PR2.bmpPRM_LOCK.bmpITMY.pngITMX.png 
  7807   Tue Dec 11 08:53:52 2012 SteveHowToPEMcables needs careHow NOT
to:
The
 IMG_1839.JPG 
  7808   Tue Dec 11 09:31:47 2012 AyakaUpdateLSCOplev update for improving sensitivity Motivation
We observed that oplev servos affect
 7x 
  7809   Tue Dec 11 10:09:04 2012 AyakaHowToPEMcables needs care

    

       
            
  
  7810   Tue Dec 11 11:40:07 2012 Manasa, AyakaUpdatePSLPMC drift[Manasa, Ayaka]
I found that MC got unstable this
morning. This is caused by the drift of PMC.
 PMCdrift121211.pdf 
  7811   Tue Dec 11 19:51:36 2012 KojiUpdatePSLPMC gain was too low / EPICS alerting value for PMC updated[Ayaka, Koji]
Ayaka pointed out that the PMC has
too low unity gain frequency. We checked
  
  7812   Tue Dec 11 21:53:37 2012 AyakaUpdateLSCOplev update for improving sensitivity[Rana, Ayaka]
The BS oplev pitch feedback came
back.
 OL_BSpit.pdfBSoplevservo.png 
  7813   Wed Dec 12 11:04:45 2012 ManasaConfiguration40m UpgradingEndtable upgrade for auxiliary green laser : ETMX layout on new tableI have updated the layout to fix all the
issues brought up. The last couple of 2"
green steering mirrors will hold the PZTs
 ETMX_endtable_New_Model.png 
  7814   Wed Dec 12 11:49:05 2012 AyakaUpdateLSCAcoustic noise in POX and AS error signal[Koji, Ayaka]
Last night, I injected acoustic noise
at POX table and AS table with oplev controls
 POX_noise4.pdfAScontXARM_acoustic.pdf 
  7815   Wed Dec 12 14:59:49 2012 ManasaConfiguration40m UpgradingNew tip-tilts layout in BSCI have updated the BSC layout to include
the new tip-tilts. The bigger footprints
of the tiptilts are on in
 bs.png 
  7816   Wed Dec 12 16:52:12 2012 JenneUpdateAlignmentPR2_face, PR3_back cameras in placeI have setup cameras looking at the back
of PR3 (through the north viewport on the
MC chamber) and the face of PR2 (through
 PR2_face_12Dec2012_SpotImage.pngPR2_face_12Dec2012_SpotImage_pixelsTimes3.pngPR3_back_12Dec2012_SpotImage.pngPR3_back_12Dec2012_SpotImage_pixelsTimes3.png 
  7817   Wed Dec 12 17:26:47 2012 RijuUpdate Testing AG4395A+GPIBI repeated my experiment to get noise level.
To get that I disconnected the bandpass filter
SBP-10.7  from channel A of network
 TFbandpassfilter.pdf 
  7818   Wed Dec 12 20:22:03 2012 JamieUpdateComputer Scripts / Programsilluminators fixed and added to VIDEO screenI fixed the illuminator setup.  ETMY
was not hooked up, and the screen wasn't
configured quite right.  The ITMX illuminator
 video.pngsitemap.png 
  7819   Thu Dec 13 01:49:53 2012 ranaUpdatePEMseismometers

    

       
            
 a.pdf 
  7820   Thu Dec 13 03:20:48 2012 DenUpdateLSCbeam inside DRMI is clipping on PR3 Tip-Tilt

    

       
            
 PR2_ITMX.pngPR2_ITMY.pngPR3_LOCK.png 
  7821   Thu Dec 13 04:29:34 2012 DenUpdateSUSTT angle of incidenceI think the angle of incidence on TT inside
BSC will be too large because of eddy current
damping brackets. I've measured max possible
  
  7822   Thu Dec 13 04:42:32 2012 DenUpdateSUSITMX local dampingTonight we've noticed that ITMX local damping
was kicking the optics. This happened because
LR shadow sensor was not working. In ~30
 lrsen.png 
  7823   Thu Dec 13 17:24:53 2012 AyakaUpdatePSLPMC calibration for MC_F calibration I calibrated MC_F signal into Hz/rtHz
unit using the transfer function from
MC_F to PMC feedback signal.
 6x 
  7824   Thu Dec 13 18:06:59 2012 AyakaUpdateWienerFilteringNew microphone mounts Yesterday, I made new mounts for
microphones.
 IMG_0129.JPGIMG_0130.JPG 
  7825   Thu Dec 13 21:21:34 2012 DenUpdatePEMseismometers

    

       
            
 gur.pdfgur_fix.pdf 
  7826   Fri Dec 14 01:42:53 2012 DenUpdateSUSTT angle of incidenceI've estimated max possible angle of incidence
on TT if we allow 20mm tolerance for the
beam size and 5 mm tolerance for spot location
 DSC_4791.jpeg 
  7827   Fri Dec 14 02:52:32 2012 KojiUpdateSUSTT angle of incidenceAt least, we don't want to use Al-coated
mirrors. We should use multilayer dielectric
mirrors.
  
  7828   Fri Dec 14 03:15:49 2012 JenneUpdateSUSTT angle of incidenceBut have you looked yet at what angle we
need? The first input string mirror has a
quite small incidence angle. The other input
  
  7829   Fri Dec 14 03:32:51 2012 AyakaUpdateLSCHigh frequency noise in AS signalI calibrated the AS error signal into the
displacement of the YARM cavity in the same
way as I did before (elog).
 XARM_OL.pdfAS_ITMXexc.pdfASspe_noise.pdfASgain.pngASspe.tar.gz 
  7830   Fri Dec 14 03:49:02 2012 AyakaUpdateGeneralEarthquakeThere was an earthquake around 2:30 am.
Now all the mirrors except SRM are damped.
 earthquake.pngseis.pdf 
  7831   Fri Dec 14 09:05:04 2012 steveUpdatePEMTT after eq 6.1 
 SRM, ITMY and MC3 moved some
what, but how are the TT? It may worth looking
 eq6.1.png 
  7832   Fri Dec 14 09:31:59 2012 ranaUpdateLSCHigh frequency noise in AS signalThis is NOT calibrated. Its sort of calibrated
in the 500-1000 Hz area, but does not correctly
use the loop TF or the cavity pole.
  
  7833   Fri Dec 14 10:09:30 2012 AyakaUpdateLSCHigh frequency noise in AS signal

    

       
            
  
  7834   Fri Dec 14 14:40:31 2012 RijuUpdate Photodiode transimpedancePhotodiode PDA10CF was under test. The
RF out signal of AG4395A had been divided
by splitter with one output of the splitter
 PDA10CF.pdf 
  7835   Fri Dec 14 16:35:38 2012 AyakaUpdateLSCHigh frequency sensitivity improvedSince I found that the the AS sensitivity
seems to be limited by circuit noise, I inserted
a RF amplifier just after the AS RF output.
 ASspe_noise_amp.pdfASspe_acoustic_amp.pdfASnoise.tar.gz 
  7836   Fri Dec 14 17:12:19 2012 Evan HallUpdatePSLPMC yaw tune-up (from Wednesday night)Wednesday night, there was ~0.4 V on the
PMC transmission PD. I adjusted the steering
mirrors into the PMC and got the transmission
  
  7837   Mon Dec 17 11:20:58 2012 JenneUpdateSUSBeam dumps on vertex oplevs removedI'm not sure when this was done, but there
were beam dumps in front of the lasers for
BS/PRM oplevs as well as ITMY/SRM oplevs. 
  
  7838   Mon Dec 17 14:13:55 2012 JenneUpdateSUSPRM oplev gains restored

    

       
            
  
  7839   Mon Dec 17 14:45:01 2012 JenneUpdateAlignmentVideos with PRMI locked[Jamie, Jenne]
Koji and Jamie locked the PRMI, and
then Jamie and I took some videos. 
  
  7840   Mon Dec 17 18:39:02 2012 JenneUpdateIOOIPPOS centered, no IPANG beamI centered IPPOS.  I do not find any
IPANG beam on the ETMY table, even waving
the IR card in the black beam tube.
  
  7841   Mon Dec 17 19:47:15 2012 ranaUpdatePEMSeismic StripTool config updatedI have updated the Seismic Striptool display
which is plotted on the wall in the control
room. Please take a look and make comments.
 SeismicRainbow.png 
  7842   Mon Dec 17 20:22:07 2012 JamieUpdateGeneralVent plan: WE VENT TOMORROWWe will vent tomorrow
(12/18)
After lengthy discussion,
I have determined that we should vent now,
  
  7843   Mon Dec 17 21:33:45 2012 ManasaUpdateGeneralVent plan: WE VENT TOMORROW

    

       
            
  
  7844   Mon Dec 17 21:41:30 2012 ranaSummarySUSBeCu wireJust in case we want to retrofit   
  7845   Mon Dec 17 22:42:27 2012 KojiSummaryGeneralThe projector lamp ended its life?i just heard a rather large exploding sound
in the control room.
I tried to locate the source and found
  
  7846   Mon Dec 17 22:49:33 2012 ManasaSummaryGeneralThe projector lamp ended its life?

    

       
            
  
  7847   Tue Dec 18 00:45:19 2012 KojiSummaryGeneralThe projector lamp ended its life?...Nah.   
ELOG V3.1.3-