40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Mon Mar 24 19:42:12 2014, Charles, Frogs, VAC, Power Failure 
    Reply  Mon Mar 24 21:36:28 2014, Koji, Update, General, Power Failure 
       Reply  Mon Mar 24 22:13:37 2014, steve, Update, General, Power Failure poweroutage.png
          Reply  Tue Mar 25 14:52:57 2014, steve, Update, VAC, vacuum is recovered 17hrsNoPumping.png
             Reply  Fri Mar 28 16:26:20 2014, steve, Update, VAC, RGA scan after power failure afterPowerFailure.png
          Reply  Tue Mar 25 16:11:24 2014, Koji, Update, General, Power Failure 
             Reply  Wed Mar 26 11:30:07 2014, Koji, Update, General, Power Failure 
                Reply  Wed Mar 26 22:22:43 2014, Manasa, Update, General, Recovery 
                   Reply  Thu Mar 27 10:34:39 2014, ericq, Update, General, Recovery 
Message ID: 9756     Entry time: Thu Mar 27 10:34:39 2014     In reply to: 9755
Author: ericq 
Type: Update 
Category: General 
Subject: Recovery 

Quote:

1. Check: ASS for X arm seems not quite doing its job. ETMX has to be moved using sliders to obtain maximum TRX and the arm alignment was seen to be drifting.

ETMX ASC output was turned off for whatever reason. Switched it on, ASS is fine.

ELOG V3.1.3-