40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Wed Oct 23 00:05:17 2013, manasa, Update, SUS, Unstable Y arm ALS points to problems with ETMY suspension Y-SUS_All.png
    Reply  Wed Oct 23 09:17:33 2013, Steve, Update, SUS, ETMY sensors compared to ETMX ETMYglitching.pngOSEMsensorsETMY&X.pngETMYgettingKickedUp.pngdrive-damp.png
       Reply  Wed Oct 23 11:42:28 2013, rana, Update, SUS, ETMY sensors compared to ETMX 
       Reply  Wed Oct 23 15:48:06 2013, rana, Update, SUS, ETMY sensors compared to ETMX remote-control-cockroach.jpg
          Reply  Wed Oct 23 17:30:17 2013, jamie, Update, SUS, ETMY sensors compared to ETMX 
             Reply  Wed Oct 23 18:24:56 2013, rana, Update, SUS, ETMY sensors compared to ETMX 
                Reply  Wed Oct 23 18:28:01 2013, Jenne, Update, SUS, ETMY sensors compared to ETMX Screenshot-Untitled_Window.pngScreenshot-Untitled_Window-1.png
                   Reply  Thu Oct 24 10:31:25 2013, Steve, Update, SUS, ETMY sensors compared to ETMX 24h_glitching.pngdampingOffref.png
                   Reply  Tue Oct 29 10:51:16 2013, Masayuki, Update, SUS, ETMY sensors compared to ETMX 
                   Reply  Tue Oct 29 22:33:57 2013, rana, Update, SUS, ETMY sensors compared to ETMX Scratch-n-SniffStinkyDooBabyShowerGame1.jpg
                      Reply  Wed Oct 30 14:58:44 2013, Steve, HowTo, General, shutting down a computer 
                Reply  Thu Oct 24 12:00:11 2013, jamie, Update, CDS, fb acquisition of slow channels  
                   Reply  Fri Oct 25 01:46:33 2013, rana, Update, CDS, fb acquisition of slow channels  
Message ID: 9267     Entry time: Wed Oct 23 18:24:56 2013     In reply to: 9266     Reply to this: 9268   9278
Author: rana 
Type: Update 
Category: SUS 
Subject: ETMY sensors compared to ETMX 

 

 While that would be good - it doesn't address the EDCU problem at hand. After some verbal emailing, Jamie and I find that the master file in target/fb/ actually doesn't point to any of the EDCU files created by any of the FE machines. It is only using the C0EDCU.ini as well as the *_SLOW.ini files that were last edited in 2011 !!!

So....we have not been adding SLOW channels via the RCG build process for a couple years. Tomorrow morning, Jamie will edit the master file and fix this unless I get to it tonight. There a bunch of old .ini files in the daq/ dir that can be deleted too.

ELOG V3.1.3-