|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| 40m Log |
Not logged in |
 |
|
|
 Fri Oct 4 12:33:27 2013, Masayuki, Update, SUS, Replaced the laser for Optical Lever of ETMY 
|
 Fri Oct 4 14:36:44 2013, rana, Update, SUS, Replaced the laser for Optical Lever of ETMY
| |
Sun Oct 6 18:37:43 2013, rana, Update, SUS, Replaced the laser for Optical Lever of ETMY
| |
Mon Oct 7 10:51:18 2013, Steve, Update, SUS, Replaced the laser for Optical Lever of ETMY
| |
Tue Oct 8 08:58:16 2013, Steve, Update, SUS, Oplev power spectrums
| |
Thu Oct 10 11:30:15 2013, Steve, Update, SUS, Oplev power spectrums: PIT-YAW
| |
Tue Oct 15 15:25:13 2013, Steve, Update, SUS, Oplev power spectrums bandwidths
| |
Wed Oct 16 10:32:40 2013, Steve, Update, SUS, Flowbench effect on oplev error signals
| |
Thu Jul 10 15:57:00 2014, Steve, Update, SUS, flow bench is turned off
| |
Thu Oct 24 17:18:44 2013, Steve, Update, SUS, ETMY oplev error signals are still bad
|
|
|
Message ID: 9246
Entry time: Wed Oct 16 10:32:40 2013
In reply to: 9241
Reply to this: 10176
|
| Author: |
Steve |
| Type: |
Update |
| Category: |
SUS |
| Subject: |
Flowbench effect on oplev error signals |
|
|
ETMX _OPLEV_...ERROR signals are effected by turning ON the flow bench motor at the south end
The broadband noise [~ 5-60 Hz] is much higher when the motor is running.
The flow bench was turned off.
|
|
|