40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Jul 9 11:37:37 2013, gautam, Update, CDS, set up for testing DAC Interface-board pin outs 
    Reply  Tue Jul 9 12:01:20 2013, gautam, Update, CDS, set up for testing DAC Interface-board pin outs 
       Reply  Tue Jul 9 18:44:37 2013, gautam, Update, CDS, DAC Interface Board-Pin Outs DAC_Interface_Board_Pin-out.pdfbreak-out_ribbon.JPG
          Reply  Tue Jul 23 04:07:48 2013, gautam, Update, CDS, Excitation points set up on c1scx 
             Reply  Tue Jul 23 16:47:01 2013, gautam, Update, CDS, Excitation points set up on c1scx 
                Reply  Tue Jul 23 19:38:58 2013, gautam, Update, CDS, Characterisation of DAC at 1X9 
Message ID: 8900     Entry time: Tue Jul 23 04:07:48 2013     In reply to: 8814     Reply to this: 8909
Author: gautam 
Type: Update 
Category: CDS 
Subject: Excitation points set up on c1scx 

 

 In light of recent events and the decision to test the piezo tip-tilts for green beam steering on the X-end table, I have set up 8 excitation points to channels 8 through 15 of the DAC on c1scx (as was done earlier for the DAC at 1Y4 with Jenne's help) in order to verify that the pin-outs of the DAC interface board. I have not yet compiled the model or restarted the computer, and will do these tomorrow, after which I will do the test. The channels are named YYY_CHAN9 etc. 

 

 

 

 

ELOG V3.1.3-