40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Jun 13 15:04:16 2013, Jenne, Update, LSC, New modeled sensing matrix SensMatMeas_23May2013.pngSensMatModel_13June2013.png
    Reply  Thu Jun 13 16:13:08 2013, nicolas, Update, LSC, New modeled sensing matrix 
       Reply  Fri Jun 14 00:32:43 2013, Jenne, Update, LSC, New modeled sensing matrix SensMatModel_13June2013_currentPRMIfreq.pngSensMatModel_13June2013_idealPRMIfreq.png
          Reply  Fri Jun 14 02:38:07 2013, rana, Update, LSC, New modeled sensing matrix 
             Reply  Mon Jun 24 11:51:23 2013, Jenne, Update, LSC, New modeled sensing matrix SensMatMeas_23May2013_21May2013_overlay.pngSensMatMeas_23May2013meas_13June2013model_overlay.pngSensMatMeas_23May2013_21May2013_NoRotation_overlay.png
Message ID: 8737     Entry time: Mon Jun 24 11:51:23 2013     In reply to: 8706
Author: Jenne 
Type: Update 
Category: LSC 
Subject: New modeled sensing matrix 


 This is nice - how about figuring out how to plot the measurement and model on the same plot? I guess we need to figure out how to go from counts to Watts.

I haven't done a units conversion for the measured vs. modelled plot,  but at least we can compare the separation between the different degree of freedom signals.  Figuring out why the REFL11 measurement and models are so different is still high on my to-do list.  But at least the measurements that were taken last month are consistent with one another. EDIT:  The separation angles match up pretty well between the 2 sets of measurements, but the overall rotation isn't really consistent.  I do not believe that the phase rotation values that we're using online changed between the measurements, so the I&Q lines should be the same for both seets of measurements....however, I did not write down the phase rotation values at the time of the first measurement, so there's a chance that they were different.  Also, something that I need to monitor is the coherence of my measurement, to make sure I'm really driving and measuring something.


2 measurements, with overall rotation arbitrarily rotated to make MICH lines match up:


Same 2 measurements, without the arbitrary overall rotation:


Measurement vs. Model, with the *modelled* phase arbitrarily rotated:


ELOG V3.1.3-