40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Jun 19 02:46:19 2013, Jenne, Update, CDS, Connected ADC channels from IOO model to ASS model 
    Reply  Wed Jun 19 18:24:14 2013, Jenne, Update, CDS, Proto-ASC implemented in ASS model 
       Reply  Mon Jun 24 16:41:40 2013, Jenne, Update, CDS, Proto-ASC implemented in ASS model 
          Reply  Tue Jun 25 00:13:00 2013, Jenne, Update, CDS, Proto-ASC implemented in ASS model 
             Reply  Tue Jul 16 18:20:25 2013, Jenne, Update, CDS, Proto-ASC implemented in ASS model 
Message ID: 8727     Entry time: Wed Jun 19 18:24:14 2013     In reply to: 8722     Reply to this: 8739
Author: Jenne 
Type: Update 
Category: CDS 
Subject: Proto-ASC implemented in ASS model 

I have implemented a proto-ASC in the ASS model.  

In an ASC block within the ASS model, I take in the POP QPD yaw, pit, and sum signals.  I ground the sum, since I don't have normalization yet (also, the QPD that we're using normalizes in the readout box already).  The pit and yaw signals each go through a filter bank, and then leave the sub-block so I can send the signals over to the SUS model, to push on PRM ASCPIT and ASCYAW. 

In doing this, I have removed the temporary PRM ASCYAW connection that Koji had made from the secret 11'th row of the LSC output matrix (see Koji's elog 8562 for details from when he implemented this stuff).

LSC, SUS and ASS were recompiled, and restarted.  I also restarted the daqd on the fb.

ELOG V3.1.3-