40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Oct 10 19:22:03 2012, jamie, Update, IOO, Added control for input tip-tilts to c1ass 2012-10-10-185707_566x330_scrot.png2012-10-10-191013_470x277_scrot.png
    Reply  Thu Oct 11 12:11:23 2012, jamie, Update, IOO, c1ass with new DAC0 output has been recompiled/install/restarted 
       Reply  Mon Oct 15 20:45:58 2012, jamie, Update, IOO, c1lsc DAC0 now connected to tip-tilt SOS DW boards 20121015_190340.png
          Reply  Tue Oct 16 00:08:26 2012, Den, Update, IOO, c1lsc DAC0 now connected to tip-tilt SOS DW boards DSC_4748.JPG
             Reply  Tue Oct 16 20:40:06 2012, Den, Update, IOO, c1lsc DAC0 now connected to tip-tilt SOS DW boards DSC_4749.JPGDSC_4755.JPG
Message ID: 7561     Entry time: Tue Oct 16 20:40:06 2012     In reply to: 7553
Author: Den 
Type: Update 
Category: IOO 
Subject: c1lsc DAC0 now connected to tip-tilt SOS DW boards 

  Full cable path from coil driver to osem input is now ready. I've tested Ch1-4 of the left AI and left coil driver. 15 pin outputs and monitors show voltage that we expect. I've checked voltage on the other side of the cable in the clean room, it is correct. We are ready to test the coils. We need to bake osem cables asap. Hopefully, Bob will start this job tomorrow.

DSC_4749.JPG DSC_4755.JPG

ELOG V3.1.3-