40m QIL Cryo_Lab CTN SUS_Lab CAML OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Wed Oct 10 19:22:03 2012, jamie, Update, IOO, Added control for input tip-tilts to c1ass 2012-10-10-185707_566x330_scrot.png2012-10-10-191013_470x277_scrot.png
    Reply  Thu Oct 11 12:11:23 2012, jamie, Update, IOO, c1ass with new DAC0 output has been recompiled/install/restarted 
       Reply  Mon Oct 15 20:45:58 2012, jamie, Update, IOO, c1lsc DAC0 now connected to tip-tilt SOS DW boards 20121015_190340.png
          Reply  Tue Oct 16 00:08:26 2012, Den, Update, IOO, c1lsc DAC0 now connected to tip-tilt SOS DW boards DSC_4748.JPG
             Reply  Tue Oct 16 20:40:06 2012, Den, Update, IOO, c1lsc DAC0 now connected to tip-tilt SOS DW boards DSC_4749.JPGDSC_4755.JPG
Message ID: 7553     Entry time: Tue Oct 16 00:08:26 2012     In reply to: 7550     Reply to this: 7561
Author: Den 
Type: Update 
Category: IOO 
Subject: c1lsc DAC0 now connected to tip-tilt SOS DW boards 

Quote:

Tomorrow I'll get new SMA cables to connect the DW/AI outputs to the coil driver boards, and I'll start testing the coil driver outputs. 

 I've found a nice 16 twisted pair cable ~25m long and decided to use it as a port from 1Y3 to clean room cable instead of buying a new long one. I've added a break out board to the coil driver end to monitor outputs.

DSC_4748.JPG

ELOG V3.1.3-