40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Mon Sep 24 16:59:31 2012, Jenne, Update, VAC, Doors on, ready to pump 
    Reply  Mon Sep 24 17:47:05 2012, Steve, Update, VAC, ready to pump 
       Reply  Tue Sep 25 17:21:01 2012, Steve, Update, VAC, pumpdown completed pd73.pngpd73b.png
          Reply  Wed Sep 26 11:03:04 2012, Steve, Update, VAC, pumpdown completed 40mpd73md1.png28datm.png
             Reply  Mon Oct 1 09:02:17 2012, Steve, Update, VAC, pumpdown reached vacuum normal pd73md6.pngpd73md6b.png
                Reply  Tue Oct 2 09:13:16 2012, Steve, Update, VAC, RGA scan at day 7 pd73md7.png
                Reply  Tue Oct 9 09:29:10 2012, Steve, Update, IOO, this is where we are 15days.png
    Reply  Mon Oct 8 22:07:46 2012, rana, Update, SUS, Doors on, ready to pump 20120921_200637.jpg
Message ID: 7507     Entry time: Mon Oct 8 22:07:46 2012     In reply to: 7432
Author: rana 
Type: Update 
Category: SUS 
Subject: Doors on, ready to pump 

Quote:

All oplevs need a little realignment, especially ETMY, which had it's lens removed (Rana has a Wall of Shame photo of this, which is why it was removed by him).  Steve will look into this tomorrow, after he starts pumping.

 The shame:

20120921_200637.jpg

There is no situation in which it is OK to install a mount like this. Steve had installed this flaky and shaky mount to optimize the beam size on the OL QPD.

Everyone in the lab should know better. Putting in something like this is just like sabotage - it creates extra noise in our interferometer in a sneaky way and just makes locking harder. All mounts for anything useful (including QPDs) must have highly rigid mounts. 

Use the example from the PSL relayout: use the 3/4" steel mounts and the wide aluminum bases from Newport. No more art projects using home made mounting crap, Steve.

ELOG V3.1.3-