40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Jun 29 02:17:40 2012, yuta, Update, IOO, prep for the vent - beam attenuating 
    Reply  Fri Jun 29 03:21:32 2012, yuta, Update, General, prep for the vent - others MEDMscreenshotswithCOW_20120629.png
       Reply  Fri Jun 29 11:02:00 2012, steve, Update, VAC, the vent is at 500 torr sussum.pngpzt.png
          Reply  Fri Jun 29 13:11:31 2012, steve, Update, VAC, 40m IFO at atm vent06292012.png40m@ATM.png
Message ID: 6894     Entry time: Fri Jun 29 11:02:00 2012     In reply to: 6893     Reply to this: 6895
Author: steve 
Type: Update 
Category: VAC 
Subject: the vent is at 500 torr 


 Steve, Yuta and Jamie

Jam nuts were checked and oplev servos were turned off. Sus summery is below with strain gauge values. Are the strain gauge values have any meaning when the PZT contorrels are off??????????????????

Attachment 1: sussum.png  24 kB  | Hide | Hide all
Attachment 2: pzt.png  14 kB  | Hide | Hide all
ELOG V3.1.3-