[Jamie, Yuta]
We recompiled c1gcv because the order of the channels were confusing. We found some change in the phase rotation module when we did this.
I did some cabling and checked each signals are actually going to the right channel. I labeled all the cables I know, which go into the AA chasis for ADC1 of c1ioo machine.
Below is the list of the channels. If you know anything about "unknown" channels, please let me know.
Current channel assignments for ADC1 of c1ioo machine:
Red ones were added today. Green ones existed in the past, but channel assignment were changed.
|
cable
|
# on AA chassis |
name in Simulink |
channel name |
|
connected
but unknown
|
J1A |
|
|
| |
|
| not connected |
J1B |
|
|
| |
|
| not connected |
J2 |
adc_1_2 |
C1:ALS-XARM_BEAT_DC |
| not connected |
adc_1_3 |
C1:ALS-YARM_BEAT_DC |
connected
but unknown |
J3 |
|
|
| |
|
connected
but unknown |
J4 |
|
|
| |
|
connected
but unknown |
J5 |
|
|
| |
|
connected
but unknown |
J6 |
|
|
| |
|
connected
but unknown |
J7 |
|
|
| |
|
| beat Y arm fine I |
J8A |
adc_1_14 |
C1:ALS-BEATY_FINE_I |
| beat Y arm fine Q |
adc_1_15 |
C1:ALS-BEATY_FINE_Q |
| not connected |
J8B |
|
|
| |
|
connected
but unknown |
J9A |
|
|
| |
|
| not connected |
J9B |
|
|
| |
|
connected
but unknown |
J10 |
|
|
| |
|
connected
but unknown |
J11 |
|
|
| |
|
| not connected |
J12 |
adc_1_22 |
C1:ALS-BEATX_COARSE_I |
| not connected |
adc_1_23 |
C1:ALS-BEATX_COARSE_Q |
| not connected |
J13 |
adc_1_24 |
C1:ALS-BEATX_FINE_I |
| not connected |
adc_1_25 |
C1:ALS-BEATX_FINE_Q |
beat Y arm coarse I
|
J14 |
adc_1_26 |
C1:ALS-BEATY_COARSE_I |
| beat Y arm coarse Q |
adc_1_27 |
C1:ALS-BEATY_COARSE_Q |
| not connected |
J15 |
adc_1_28 |
Broken! Don't use this!! |
| adc_1_29 |
(not broken) |
| not connected |
J16A |
adc_1_30 |
(not broken) |
| adc_1_31 |
Broken? Funny signal. |
| not connected |
J16B |
|
|
| |
|
Memorandum for me:
Recompiling procedure;
ssh c1ioo
rtcds make c1gcv
rtcds install c1gcv
rtcds start c1gcv |