40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Jun 5 20:42:59 2012, Suresh, Summary, IOO, Tip-Tilt Cabling 40m_Tip-tilt_cabling.png
    Reply  Tue Jun 5 22:39:06 2012, Jenne, Summary, IOO, Tip-Tilt Cabling 
       Reply  Wed Jun 6 01:23:32 2012, Suresh, Summary, IOO, Tip-Tilt Cabling 
Message ID: 6762     Entry time: Wed Jun 6 01:23:32 2012     In reply to: 6759
Author: Suresh 
Type: Summary 
Category: IOO 
Subject: Tip-Tilt Cabling 

Quote:

2 questions (so far) regarding your diagram / doc:

We are using 3 of the feed-throughs on the BS chamber, and 1 on the OMC chamber, even though we have 2 TTs on the BS table, 1 on the OMC table, and 1 on the IMC table? Just wanted to check.

Does your list / table at the bottom include all of the cables we already have, as well as the ones we need?  (Or maybe we just have nothing so far, so this is a moot question).

 The scheme currently is to run a 25pin Kapton strip cable from BS to IMC table inside the chamber.  However we cannot do the same for the OMC table since it will cross the bellows which we often remove.  So we need to supply the one tip-tilt on the OMC table from outside.  I could not spot a spare unused feedthough on the OMC chamber.  We will have to swap one of the blank flanges for one with a few feed throughs.

We do not have any of the cables.   So everything listed has to be arranged for.   The pics are from the existing coil driver system on the SUS machine.

 

ELOG V3.1.3-