From 2PM, Jenne/Den/Koji. Finished at 10:30PM

• General
  • More LCD screens! Wider screens!
    • Allegra - only can handle single head right now, but should prepare for the eventual upgrade of that videocard/whole computer and get 2 monitors.
    • Every workstation should have 2 24" monitors.  We currently have 2 good ones (one on Rossa, one on Pianosa), so we need 6.
  • Remove Control room shelf currently holding OSA 'scopes
  • Adjust both TV shelves so that they're at the same height, ~6" higher than the current left shelf.
    This gives space for stacking the 24" monitors for each computer.
  • Audio system for the signals!!!! Even a crappy one!
         /cvs/cds/ligo/centos5.5/cds/project/gds-2.14.2/Monitors/rockIFO
         /cvs/cds/gds/gds/Monitors/rockIFO
         (really /cvs/cds, not /opt)
    
    
• IOO
  • PZT or Picomotor mounts for PSL/ALS beams
  • ALS on the both arm simultaneously / common/diff ALS scripts
• SUS
  • PRM OPLEV servos are sometimes not stable. (fixed, JCD/DM/KA, 5/2/2012)
  • ETMX oplev - replace 1064nm lens with 632nm lens (KBC037, -100)
• IFO
  • It seems that there is an occasional common-mode power transient in the arm transmissions.
    -> Track down the cause and fix.
  • Fix arm ASS even on CentOS
  • Drift of the green incident axis -> Assess the amount of the drift / replace the mount
  • Calibration of POP22 / AS110
  • PMC/IMC/ARM characterization (loss, finesse, reflectivity, etc)
• CDS
  • Capture OSA signals in CDS (the 'scope TDS1001B has a USB port in the back for connecting to the computer)
  • Transmon (arms) for high and low power
  • POX11 whitening is not toggling the analog whitening???
  • CentOS machines cannot open simulink models properly (get "Bad Link"s everywhere, so you can't do anything useful).
  • Dataviewer and DTT can't connect to framebuilder from CentIOS machines
• Electronics
  • Actuator noise level characterization (coil driver response in V/m & coil driver noise level V/rtHz)
  • Beat box
  • I/Q DFD
  • Improvement of POP22/110/AS110 RF circuits.
• MEDM
  • OL alert in the watch dog screen (this is awesome!) should have small text saying "OL" (done, JCD, 5May2012)
  • Complete 40m overview screen - everything should be clickable with pseudo 3D icons
  • BETTER SUSPENSION SCREEN!!!
  • Script to generate a MEDM tree
  • Resurrect MEDM snapshots
     
  • The LSC screen has some "white" boxes -> investigate and fix them (done, KA, 5/2/2012)
  • Make the LSC control screen (compact) in the vertical arrangement (done, KA, 5/2/2012)
  • The signals of the watch dog screen should go red if any of the WDs are not enabled.
    =>Copy the logic of the signals in LSC screen. (done, KA, 5/2/2012)
  • Remove c1gfd from the cds status screen (done, KA, 5/2/2012)
  • Add "BURT" status indicators on the cds status screen (done, KA, 5/2/2012)
• SCRIPT
  • Locking scripts with integrator triggers / disabling when unlocked
  • Daily diagnosis of the MC spot positions (there must be something already...)
  • Daily/occasional adjustment of the incident axis on the MC
  • Suspension "misalign/restore" script is too wild => make a new script (Done, JCD, 7May2012)
  • IFO_CONFIGURE scripts still do a burt restore, so step the optics.  Need to remove optic alignment from config .snap files, use reg restore script instead.
  • OPLEV/OSEM trending script before the IFO work for diagnosis.
  • Auto-locker for PMC/Arm/etc
• Video
  • If each video screen has a caption, that would be great
  • GUI interface of "videoswitch" Mike!
  • Mouse Jiggler for Zita (called Swinput?)
• Ubuntu
  • burttoday is not aliased in ubuntu. burttoday:      aliased to cd /opt/rtcds/caltech/c1/burt/autoburt/today/
  • ASS doesn't run on Ubuntu!
    ezcawrite: error while loading shared libraries: libca.so: cannot open shared object file: No such file or directory
ezcaswitch: error while loading shared libraries: libca.so: cannot open shared object file: No such file or directory