40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Nov 23 18:28:09 2011, Koji, Update, IOO, RFAMPD channels / EOM monitor channels added to DAQ 
    Reply  Thu Nov 24 05:10:00 2011, Koji, Update, IOO, RFAMPD channels / EOM monitor channels added to DAQ 
       Reply  Thu Nov 24 10:27:07 2011, Jenne, Update, IOO, RFAMPD channels / EOM monitor channels added to DAQ EOM_temp_sense_heater_drive_schematic_withMONs.png
          Reply  Thu Nov 24 12:45:12 2011, Zach, Update, IOO, RFAMPD channels / EOM monitor channels added to DAQ 
             Reply  Thu Nov 24 13:54:31 2011, Koji, Update, IOO, RFAMPD channels / EOM monitor channels added to DAQ 
Message ID: 5995     Entry time: Thu Nov 24 05:10:00 2011     In reply to: 5991     Reply to this: 5997
Author: Koji 
Type: Update 
Category: IOO 
Subject: RFAMPD channels / EOM monitor channels added to DAQ 

EOM TEMPMON and HEATER DRIVEMON have been hooked up to the following channels.

C1:IOO-EOM_TEMPMON
C1:IOO-EOM_HEATER_DRIVEMON 

What a fragile circuit...

I found some of the resistors popped up from the board because of the tension by the Pomona grabbers.
I tried to fix it based on the schematic (photo) and the board photo.

ELOG V3.1.3-