40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 5846     Entry time: Wed Nov 9 12:05:08 2011
Author: Katrin 
Type: Update 
Category: Green Locking 
Subject: YARM error signal and feedback signal 

error signal = signal measured behind the low-pass filter

feedback signal = output of the gain servo, going to the PZT

 

First of all both signals in V/sqrt(Hz) just in case I mess up the next calibration step.

fluctuation_test.png

The 60 Hz line (and its multiple) are a new feature. They show up as soon as the feedback loop is closed. So far, I couldn't find their origin.

 

For the next calibration step:

  • width of a typical error signal, i.e. the frequency band width of the carrier slope, ~1.4 kHz
  • height of a typical error signal 182 mV
ELOG V3.1.3-