40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Nov 2 10:41:47 2011, steve, Update, General, 2 spare heliax at the LSC rack 
    Reply  Wed Nov 2 19:32:20 2011, kiwamu, Update, LSC, POP22/110 installed 
       Reply  Thu Nov 3 14:25:52 2011, kiwamu, Update, LSC, PDA10A as POP22/110 : too small signal 
          Reply  Thu Nov 3 16:31:47 2011, kiwamu, Update, LSC, PDA10CF as POP22/110 : better 
Message ID: 5788     Entry time: Wed Nov 2 19:32:20 2011     In reply to: 5783     Reply to this: 5794
Author: kiwamu 
Type: Update 
Category: LSC 
Subject: POP22/110 installed 

[Steve / Kiwamu]

 The POP22/110 RFPD has been installed. It is PDA10A from Thorlabs instead of the usual home-made RFPD.
For an RF cable we rerouted one of the spare Heliax cables for it.
The cable is the one which used to be served for the 166MHz ASC wavefront sensors, picking up the RF source signal at 1X2 and sending it to the LSC rack.
 - - Remaining tasks - -
  + Fine alignment
  + Connection at the LSC rack
  + Update of the table diagram

Quote from #5783

They were traced and labeled. One goes to 1X2 and the other to AS-ISCT. They are Andrew Heliax 1/4" od. made by CommScone,  model number FSJ1-50A

ELOG V3.1.3-