40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 5748     Entry time: Fri Oct 28 00:53:39 2011
Author: rana 
Type: Update 
Category: Electronics 
Subject: POP 22/110 Design 

The attached PDF shows a possible gain / input noise config for the POP 22/110 that we would use to detect the RF power in the DRMI. Design is in the SVN.

If Kiwamu/Jenne say that this has good enough sensing noise for the lock triggering than we will build it. This is using a 2mm diode.

If we can get away with 1 mm, we might as well use a PDA10CF for now.

Attachment 1: poy22110.pdf  64 kB  | Hide | Hide all
poy22110.pdf poy22110.pdf
ELOG V3.1.3-