40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Sep 2 17:52:16 2011, kiwamu, Update, SUS, ITMX realigned 
    Reply  Tue Sep 6 08:05:53 2011, steve, Update, SUS, ITMX must be touching osemITMX.jpg
Message ID: 5337     Entry time: Fri Sep 2 17:52:16 2011     Reply to this: 5341
Author: kiwamu 
Type: Update 
Category: SUS 
Subject: ITMX realigned 

The new ITMX was aligned by changing the DC biases.

The resultant DC biases are reasonably small.

C1:SUS-ITMX_PIT_COMM = -0.2909

C1:SUS-ITMX_YAW_COMM = -0.0617

 

The alignment was done by trying to resonate the green light in the X arm cavity.

The spot position of the green light on the ITMX mirror looked good. This was confirmed by inserting a sensor card.

I did the OSEM mid-range adjustment and the rotation adjustment but at the end the OSEM DC voltage has changed due to the DC bias operation.

The OSEM rotation was approximately optimized so that all the face shadow sensors are sensitive to the POS motion but the SIDE shadow sensor is insensitive to the POS motion.

It needs a free swinging diagnosis.

ELOG V3.1.3-