40m QIL Cryo_Lab CTN SUS_Lab CAML OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 529     Entry time: Wed Jun 11 11:45:25 2008
Author: steve 
Type: Update 
Category: PSL 
Subject: ss trap works 
The trap works well at 3 W level. No back reflected beam coming out of the trap on low power
sensing card level. The back scattering was not measured. The trap is insensitive to small pointing variations.
The SS surface did not show any visible degradation after 16 hrs of 3w exposure at elliptical beam size 4x8 mm

It is ready to be placed into the 35 W beam.
Attachment 1: P1020534.png  1.158 MB  | Show | Show all
Attachment 2: P1020533.png  1.142 MB  | Show | Show all
ELOG V3.1.3-