40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Sat Aug 13 15:47:47 2011, Nicole, Summary, SUS, TT Optimization Curves magstrength1.jpgdampermass.jpgresfreq.jpg
    Reply  Sat Aug 13 19:08:01 2011, Koji, Summary, SUS, TT Optimization Curves 
       Reply  Sat Aug 13 21:15:47 2011, Nicole, Summary, SUS, TT Optimization Curves 
          Reply  Sat Aug 13 21:48:17 2011, Koji, Summary, SUS, TT Optimization Curves 
             Reply  Sun Aug 14 00:26:51 2011, Nicole, Summary, SUS, TT Optimization Curves 
                Reply  Sun Aug 14 13:57:52 2011, Nicole, Summary, SUS, TT Optimization Curves FLEX_exp_mod_comp.jpg
Message ID: 5224     Entry time: Sat Aug 13 19:08:01 2011     In reply to: 5223     Reply to this: 5225
Author: Koji 
Type: Summary 
Category: SUS 
Subject: TT Optimization Curves 

What are the parameters you are using? As you have the drawings of the components, you can calculate the masses of the objects.

 

Reducing the ECD resonance from 10Hz->6Hz looks nice.

The resonant freq of the ECDs are not (fully) determined by the gravitational energy but have the contribution of the elastic energy of the wire.

Q1: How much is the res freq of the ECDs if the freq is completely determined by the grav energy? (i.e. the case of using much thinner wires)

Q2: How thin should the wires be?

ELOG V3.1.3-