40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Jun 17 16:05:07 2011, kiwamu, Update, ABSL, LightWave out of MOPA box DSC_3139_small.png
    Reply  Mon Jun 20 11:38:49 2011, kiwamu, Update, ABSL, I-P curve of LightWave M126-1064-700 IP_curve.png
       Reply  Mon Jun 20 13:48:25 2011, Koji, Update, ABSL, I-P curve of LightWave M126-1064-700 
       Reply  Mon Jun 20 16:44:02 2011, steve, Update, ABSL, I-P curve of LightWave M126-1064-700 
          Reply  Thu Jun 23 22:59:45 2011, kiwamu, Update, ABSL, I-P curve of LWE IP_curve_small.png
             Reply  Fri Jun 24 07:49:23 2011, steve, Update, ABSL, I-P curve of LWE with serial numbers 
Message ID: 4877     Entry time: Fri Jun 24 07:49:23 2011     In reply to: 4872
Author: steve 
Type: Update 
Category: ABSL 
Subject: I-P curve of LWE with serial numbers 

Quote:

 The I-P curve was measured again, but this time in a lower current range of 1.0-1.9 [A].

Quote from #4842

The old days the NPRO ( inside the MOPA ) was running ~1.7A  500 mW

 Lightwave Laser Head M126-1064-700   sn238,  mounted on full size Al base and side heat sink on

Controller 125/126 Smart Supply   sn 201M

ELOG V3.1.3-