40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Oct 13 18:01:43 2010, yuta, HowTo, CDS, editting all the similar medm screens 
    Reply  Thu Oct 14 00:54:12 2010, rana, HowTo, CDS, Bad PSL Quad, so I edited the SUS MEDM screens Untitled.png
    Reply  Tue Oct 26 12:45:20 2010, yuta, HowTo, CDS, making a new master file for medm screens 
Message ID: 3712     Entry time: Thu Oct 14 00:54:12 2010     In reply to: 3708
Author: rana 
Type: HowTo 
Category: CDS 
Subject: Bad PSL Quad, so I edited the SUS MEDM screens 

We found today that there was some (unforgivably un-elogged) PSL-POS & PSL-ANG work today.

The wedge splitter at the end of the PSL table is so terribly dogged that it actually moves around irreversibly if you touch the post a little. Pictures have been recorded for the hall of shame. This should be replaced with a non-pedestal / fork mount.

I was so sad about the fork clamp, that I edited the SUS Master screen instead according to Joe-Yuta instructions; see attached.Untitled.png

There's clearly several broken/white links on there, but I guess that Yuta is going to find out how to fix these from Joe in the morning.

ELOG V3.1.3-