|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| 40m Log |
Not logged in |
 |
|
|
 Mon Feb 18 12:04:39 2008, Alberto, Update, Electronics, RF Monitor (StocMon) 
|
 Fri Feb 22 08:29:07 2008, Alberto, Update, Electronics, RF Monitor (StocMon)
| |
Fri Feb 22 11:13:15 2008, rob, Update, Electronics, RF Monitor (StocMon)
| |
Fri Feb 22 08:33:18 2008, Alberto, Update, Electronics, RF Monitor (StocMon)
| |
Thu Feb 28 19:49:21 2008, rob, Update, Electronics, RF Monitor (StocMon)
|
|
|
Message ID: 347
Entry time: Thu Feb 28 19:49:21 2008
In reply to: 332
|
| Author: |
rob |
| Type: |
Update |
| Category: |
Electronics |
| Subject: |
RF Monitor (StocMon) |
|
|
| Quote: |
With Ben, we hooked up the RF Monitor box into the PSL rack and created 4 EPICS channels for the outputs:
C1:IOO_RF_STOC_MON_33
C1:IOO_RF_STOC_MON_133
C1:IOO_RF_STOC_MON_166
C1:IOO_RF_STOC_MON_199
The power cable bringing +15V to the preamplifier on the PSL table should be replaced eventually. |
I changed the names of these channels to the more appropriate (and informative, as they're coming from the RFAMPD):
C1:IOO-RFAMPD_33MHZ
C1:IOO-RFAMPD_133MHZ
C1:IOO-RFAMPD_166MHZ
C1:IOO-RFAMPD_199MHZ
I also added them in an aesthetically sound manner to the C1IOO_LockMC.adl screen and put them in trends. Along the way, I also lost whatever Alberto had done to make these monitors read zero when there's no light on the diode. It doesn't appear to be written down anywhere, and would have been lost with a reboot anyway. We'll need a more permanent & automatable solution for this. |