I reconfigured the MC reflection path for low power. This meant the following changes:

• Replaced the 10% reflection BS by 98% reflection beam splitter
• Realigned the BS angle to get maximum on C1:IOO-MC_RFPD_DCMON when cavity is unlocked.
• Then realigned the steering mirrors for WFS1 and WFS2.
• I tried to align the light for MC reflection CCD but then I realized that the pickoff for the camera is too low for it to be able to see anything.

Note, even the pick-off for WFS1 and WFS2 is too low I think. The IOO WFS alignment does not work properly for such low levels of light. I tried running the WFS loop for IMC and it just took the cavity out of the lock. So for low power scenario, we would keep the WFS loops OFF.