40m QIL Cryo_Lab CTN SUS_Lab CAML OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 16436     Entry time: Wed Oct 27 19:34:52 2021
Author: Koji 
Type: Summary 
Category: Electronics 
Subject: New electronics racks 

1. The rack we cleaned today (came from West Bridge) will be placed between 1X3 and 1X4, right next to 1X4 (after removing the plastic boxes). (Attachment 1)
For easier work at the side of the 1X4, the side panel of the 1X4 should be removed before placing the new rack. Note that this rack is imperial and has 10-32 threads

2. In terms of the other rack for the Y arm, we found the rack in the storage is quite dirty. Anchal pointed out that we have a few racks standing along the Y arm (as the storage of the old VME/Euro card electronics) (Attachments 2/3)
They are not too dirty and also doing nothing there. Let's vacate one of them (the one right next to the optics preparation table). Use this space as a new storage area placing a wire shelving rack for something.

BTW, I thought it is good to have the rack at the vertex side of 1Y1 (as 1Y0?), but the floor has "KEEP OUT" marking. I have no idea why we have this marking. Is this for crane operation??? Does any one know?

Attachment 1: P_20211027_180737.jpg  1.223 MB  Uploaded Wed Oct 27 20:41:37 2021  | Show | Show all
Attachment 2: P_20211027_180443.jpg  1.934 MB  Uploaded Wed Oct 27 20:41:47 2021  | Show | Show all
Attachment 3: P_20211027_180408.jpg  1.728 MB  Uploaded Wed Oct 27 20:42:01 2021  | Show | Show all
Attachment 4: P_20211027_180139.jpg  2.141 MB  Uploaded Wed Oct 27 20:43:53 2021  | Show | Show all
ELOG V3.1.3-