|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| 40m Log |
Not logged in |
 |
|
|
 Fri Aug 10 11:29:39 2018, aaron, Configuration, Upgrade, Parts list for BHD
|
 Fri Aug 10 16:43:50 2018, gautam, Configuration, Upgrade, Parts list for BHD
| |
Sun Aug 12 10:59:34 2018, aaron, Configuration, Upgrade, Parts list for BHD
|
Mon Aug 13 17:20:07 2018, aaron, Configuration, Upgrade, Parts list for BHD 
|
|
|
Message ID: 14154
Entry time: Fri Aug 10 16:43:50 2018
In reply to: 14153
Reply to this: 14155
|
| Author: |
gautam |
| Type: |
Configuration |
| Category: |
Upgrade |
| Subject: |
Parts list for BHD |
|
|
Can we use the leakage beam from MMT2 on the OMC table as the LO beam? I can't find the spec for this optic, but the leakage beam was clearly visible on an IR card even with the IMC locked with 100 mW input power so presumably there's enough light there, and this is a cavity transmission beam which presumably has some HOM content filtered out.
| Quote: |
|
My current thought is to use the MC reflection, the beam that heads from MC1 to MCR1, as the LO beam
|
|