40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 14089     Entry time: Thu Jul 19 18:09:17 2018
Author: pooja 
Type: Update 
Category: Cameras 
Subject: Update in developing neural networks 

Aim: To develop a neural network that resolves mirror motion from video.

Case 1:

Input : Simulated video of beam spot motion in pitch by applying 4 sine  waves of frquencies 0.2, 0.4, 0.1, 0.3 Hz  and amplitude ratios to frame size to be 0.1, 0.04, 0.05, 0.08

The data has been split into train, validation and test datasets and I tried training on neural network with the same model topology & parameters as in my previous elog (https://nodus.ligo.caltech.edu:8081/40m/14070)

The output of NN and residual error have been shown in Attachment 1. This NN model gives a large error for this. So I think we have to increase the number of nodes and learning rate so that we get a lower error value with a single sine wave simulated video ( but not overfitting) and then try training on linear combination of sine waves.

Case 2 :

Normalized the target sine signal of NN so that it ranges from -1 to 1 and then trained on the same neural network as in my previous elog with simulated video created using single sine wave. This gave comparatively lower error (shown in Attachment 2). But if we train using this network, we can get only the frequency of test mass motion but we can't resolve the amount by which test mass moves. So I'm unclear about whether we can use this.

Attachment 1: nn_simulation_mlt_sine_nodes4_lr0p00001_beta1_0p8_beta2_0p85_marked.pdf  173 kB  Uploaded Thu Jul 19 19:27:54 2018  | Hide | Hide all
nn_simulation_mlt_sine_nodes4_lr0p00001_beta1_0p8_beta2_0p85_marked.pdf
Attachment 2: nn_simulation_2_nodes4_target-1to1_marked.pdf  261 kB  Uploaded Thu Jul 19 19:28:12 2018  | Hide | Hide all
nn_simulation_2_nodes4_target-1to1_marked.pdf
ELOG V3.1.3-