40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 14071     Entry time: Fri Jul 13 23:39:46 2018
Author: Annalisa 
Type: Configuration 
Category: Thermal Compensation 
Subject: Thermal compensation setup - power supply 

[Annalisa, Rana]

In order to power the heater setup to be installed in the ETMY chamber, we took the Sorensen DSC33-33E power supply from the Xend rack which was supposed to power the heater for the seismometer setup.

We modified the J3 connector behind in such a way to allow a remote control (unsoldered pins 9 and 8). 

Now pins 9 and 12 need to be connected to a BNC cable running to the EPICS.


RXA update: the Sorensen's have the capability to be controlled by an external current source, voltage source, or resistive load. We have configured it so that 0-5V moves the output from 0-33 V. There is also the possibility to make it a current source and have the output current (rather than voltage) follow the control voltage. This might be useful since out heater resistance is changing with temperature.

Attachment 1: IMG_2012.jpg  489 kB  Uploaded Sat Jul 14 00:43:44 2018  | Hide | Hide all
IMG_2012.jpg
Attachment 2: IMG_2013.jpg  697 kB  Uploaded Sat Jul 14 00:43:50 2018  | Hide | Hide all
IMG_2013.jpg
Attachment 3: 20180713_213818.jpg  1.057 MB  Uploaded Sun Jul 15 00:40:03 2018  | Hide | Hide all
20180713_213818.jpg
ELOG V3.1.3-