40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Jun 21 14:23:22 2018, Udit Khandelwal, Summary, General, A summary of the Tip-TIlt Mirror Holder design changes 1.png2.png3-1.png3-2.png3-3.png
    Reply  Thu Jun 21 14:57:59 2018, Koji, Summary, General, A summary of the Tip-TIlt Mirror Holder design changes 
       Reply  Mon Jun 25 19:14:02 2018, Udit, Summary, General, Re: A summary of the Tip-TIlt Mirror Holder design changes 4-1.png4-2.png
          Reply  Mon Jun 25 21:14:08 2018, Koji, Summary, General, Re: A summary of the Tip-TIlt Mirror Holder design changes 
Message ID: 14015     Entry time: Mon Jun 25 21:14:08 2018     In reply to: 14014
Author: Koji 
Type: Summary 
Category: General 
Subject: Re: A summary of the Tip-TIlt Mirror Holder design changes 

3.
- Do we need this much of extended range of the clamp location? How much range will we need if we use either 3/8 or 1/4 inch mirrors?
- This slot on the mirror holder ring is not machinable.

About the CoM height
- Include the angle adjustment screw and adjust the wire releasing point to have comparable pitch resonant freq to the SOS suspension.

 

ELOG V3.1.3-