40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Mon Jun 4 19:41:01 2018, keerthana, Update, , Finesse code for cavity scan Fig1.pngFig2.png
    Reply  Wed Jun 13 18:08:36 2018, keerthana, Update, , Finesse code for cavity scan finesse1.pdffinesse2.pdf
Message ID: 13956     Entry time: Wed Jun 13 18:08:36 2018     In reply to: 13915
Author: keerthana 
Type: Update 
Category:  
Subject: Finesse code for cavity scan 

The unit mentioned in the x-axis was wrong. So I have remade the graphs. The point where frequency equals to zero is actually the frequency corresponding to the laser, which is in the range of 1014 Hz and it caliberated as zero.

Quote:

The cavity scan data obtained from the Finesse simulation is attached here. Fig1 indicates the cavity scan data in the absence of induced misalignment. In that case only the fundemental mode is resonating. But when a misalignment is induced, higher order modes are also present as seen in Fig2. This is in the absence of surface figure error in the mirrors. Now I am trying to provide perturbations to the mirror surface in the form of zernike polynomials and get the scan data fom the simulation. These cavity scan data can be used to develop fitting models. Once we have a model, we can use it to analyse the data from the experimental cavity scan.

finesse1.pdffinesse2.pdf

Attachment 1: finesse1.pdf  15 kB  Uploaded Wed Jun 13 19:12:48 2018  | Hide | Hide all
finesse1.pdf
Attachment 2: finesse2.pdf  13 kB  Uploaded Wed Jun 13 19:12:48 2018  | Hide | Hide all
finesse2.pdf
ELOG V3.1.3-