40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Jun 7 10:26:36 2018, keerthana, Update, PSL, observing the resonance signal corresponding to the injected frequency. photodetector_alignment.jpgdesign1.PNG
    Reply  Thu Jun 7 22:36:09 2018, not keerthana, Update, PSL, observing the resonance signal corresponding to the injected frequency. 
    Reply  Fri Jun 8 00:36:54 2018, gautam, Update, PSL, observing the resonance signal corresponding to the injected frequency. 
    Reply  Fri Jun 8 01:08:22 2018, johannes, Update, PSL, First light of AUX at YEND AG4395A_07-06-2018_205019.pdfPSL_AUX_SETUP.pdfAS_AUX_SETUP.pdf
       Reply  Mon Jun 18 14:32:42 2018, gautam, Update, PSL, Optics on AS table 
          Reply  Mon Jun 18 15:59:17 2018, johannes, Update, PSL, Optics on AS table 
             Reply  Mon Jun 18 16:57:54 2018, Koji, Update, PSL, Optics on AS table 
             Reply  Fri Jun 22 14:18:04 2018, Steve, Update, PSL, Optics on AS table 
Message ID: 13931     Entry time: Fri Jun 8 00:36:54 2018     In reply to: 13924
Author: gautam 
Type: Update 
Category: PSL 
Subject: observing the resonance signal corresponding to the injected frequency. 

It isn't clear to me in the drawing where the Agilent is during this measurement. Over 40m of cabling, the loss of signal can be a few dB, and considering we don't have a whole lot of signal in the first place, it may be better to send the stronger RF signal (i.e. Marconi pickoff) over the long cable rather than the weak beat signal from the Transmission photodiode. 

ELOG V3.1.3-