40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Sep 8 12:08:32 2017, Gabriele, Summary, LSC, Good reconstruction of PRMI degrees of freedom with deep learning full_real_data_2017_09_06b_100x4_4000_300_20_free_swinging_time_domain.png.pngfull_real_data_2017_09_06b_100x4_4000_300_20_free_swinging_free_swinging_histograms2d.png.pnggru_2017_08_13a_100x4_4000_300_20_free_swinging_simulation_reference.png.png
    Reply  Fri Oct 6 12:56:40 2017, gautam, Summary, LSC, RTCDS NN post_NN_test.png
       Reply  Tue Oct 17 17:53:25 2017, jamie, Summary, LSC, prep for tests of Gabriele's neural network cavity length reconstruction c1dnn.png
          Reply  Wed Oct 18 12:14:08 2017, jamie, Summary, LSC, prep for tests of Gabriele's neural network cavity length reconstruction 
             Reply  Thu Oct 19 15:42:03 2017, jamie, Summary, LSC, MICH/PRCL reconstruction neural network running on c1lsc NN.pngC1DNN_GDS.pngC1DNN_CPU_METER.png
                Reply  Tue Oct 24 20:14:21 2017, jamie, Summary, LSC, further testing of c1dnn integration; plugged in to DAQ NN.pngc1dnn_out.png
                   Reply  Wed Oct 25 09:32:14 2017, Gabriele, Summary, LSC, further testing of c1dnn integration; plugged in to DAQ 
                   Reply  Mon Nov 6 18:22:48 2017, jamie, Summary, LSC, current procedure for running c1dnn code 
                      Reply  Thu Nov 9 10:51:37 2017, gautam, Summary, LSC, current procedure for compiling and installing c1dnn code 
Message ID: 13421     Entry time: Thu Nov 9 10:51:37 2017     In reply to: 13411
Author: gautam 
Type: Summary 
Category: LSC 
Subject: current procedure for compiling and installing c1dnn code 

Jamie pointed out that the compile and install instructions are different for c1dnn:

cd /opt/rtcds/caltech/c1/rtbuild/test/nn-test
make c1dnn
make install-c1dnn

See also: https://nodus.ligo.caltech.edu:8081/40m/13383.

I think these build instructions have to be run on the c1lsc frontend - in the past, I have been able to compile and install models on any computer with the shared drive mounted (including the control room workstations), but I'm guessing that something has changed since the RCG upgrade. Jamie can correct me on this if I'm wrong.

ELOG V3.1.3-