40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 13398     Entry time: Tue Oct 24 16:22:53 2017
Author: gautam 
Type: Update 
Category: CDS 
Subject: Toy DARM model setup in c1tst 

[alex, gautam]

Alex is going to have an undergrad work on a calibration optimization project on the 40m RTCDS system. For this purpose, we wanted to setup a "Simulated DARM loop". Today, Alex and I set this up. I figured we can use the c1tst model for this purpose. We basically copied the topology from Figure 2 of the h(t) paper. Attached are screenshots of the MEDM screens of the system we setup, and the simulink block diagram - the main screen can be accessed from the "SIM PLANT" tab in the sitemp.

It remains to setup the appropriate filters in the filter banks, and an EPICS channel monitor for monitoring the single excitation testpoint in the model. We also did not set up any DQ channels for the time being, as it is not even clear to me what channels need to be DQ-ed.

Attachment 1: TOY_DARM.png  242 kB  | Show | Show all
Attachment 2: TOY_DARM_SIMULINK.png  77 kB  Uploaded Tue Oct 24 17:28:00 2017  | Show | Show all
ELOG V3.1.3-