40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed May 17 18:08:45 2017, Dhruva, Update, Optical Levers, Beam Profiling Setup 1.jpg2.jpg3.jpg4.jpg5.jpg
    Reply  Mon May 22 10:53:02 2017, Dhruva, Update, Optical Levers, Beam Profiling Results  6x
       Reply  Tue May 23 10:27:24 2017, Dhruva, Update, Optical Levers, Beam Profiling Results  6x
          Reply  Tue May 23 15:22:04 2017, rana, Update, Optical Levers, Beam Profiling Results  
             Reply  Tue May 30 18:31:54 2017, Dhruva, Update, Optical Levers, Beam Profiling Results  plots.pdfspot_size_y.pdf
                Reply  Thu Jun 8 12:43:42 2017, Dhruva, Update, Optical Levers, Beam Profiling Results  profile.pdf
          Reply  Tue May 23 16:33:00 2017, Steve, Update, Optical Levers, Beam Profiling Results  
Message ID: 13007     Entry time: Tue May 23 15:22:04 2017     In reply to: 13006     Reply to this: 13021
Author: rana 
Type: Update 
Category: Optical Levers 
Subject: Beam Profiling Results  
  1. Include several sources of error. Micrometer error is one, but you should be able to think of at least 3 more.
  2. There should be an error bar for the x and y axis.
  3. Also, use pdftk to put the PDFs all into a single file. Remove so much whitespace.
  4. Google 'beautiful plots python' and try to make your plots for the elog be more like publication quality for PRL or Nature.
ELOG V3.1.3-