40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Mar 14 09:08:11 2017, Steve, Update, Optical Levers, ETMX HeNe is dead this_morning.png
    Reply  Tue Mar 14 15:05:18 2017, Steve, Update, Optical Levers, history of ETMX oplev laser ETMX_1103P_3y.png
       Reply  Fri Mar 17 10:47:16 2017, Steve, Update, Optical Levers, ETMX oplev laser replaced 
Message ID: 12890     Entry time: Fri Mar 17 10:47:16 2017     In reply to: 12888
Author: Steve 
Type: Update 
Category: Optical Levers 
Subject: ETMX oplev laser replaced 

JDSU 1103P. sn T8070866, made March 2007, output power 2.7 mW,  on pd 17,750 counts,

GV 17 March 3pm: I found the Innolight NPRO was off when I walked down to the X end earlier, possibly was accidentally tripped during the Oplev laser replacement. I turned it back on.




ETMX oplev laser is dead. It will be replaced this after noon. Sus damping recovered.

This 3 years old HeNe [ JDS 1103P, sn 351889 ]  has been dying for some time or just playing possum at age 1,126 days

I did not replace the ETMX oplev laser because I was unable to bring up the the C1ASC_ETMX_OPTLEV_SERVO  medm screen on laptops.


ELOG V3.1.3-