40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Feb 16 13:29:38 2017, gautam, Summary, General, Alternative Calibration Scheme AltCal.pdf
    Reply  Thu Feb 16 21:55:47 2017, rana, Summary, General, Alternative Calibration Scheme 
       Reply  Tue Feb 21 13:51:35 2017, Craig, Summary, General, Alternative Calibration Scheme 
          Reply  Wed Feb 22 10:16:54 2017, rana, Summary, General, Alternative Calibration Scheme 
Message ID: 12835     Entry time: Thu Feb 16 21:55:47 2017     In reply to: 12834     Reply to this: 12842
Author: rana 
Type: Summary 
Category: General 
Subject: Alternative Calibration Scheme 

Question for Craig: What does the SNR of our lines have to be? IF we're only trying to calibrate the actuator in the audio band over long time scales, it seems we could get by with more frequency noise. Assuming we want a 1% calibration at 50-500 Hz, what is the requirement on the frequency noise PSD curve?

ELOG V3.1.3-