|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
CAML
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| 40m Log |
Not logged in |
 |
|
|
 Fri Jun 10 16:19:03 2016, ericq, Update, SUS, ETMX watch
|
 Mon Jun 13 10:01:58 2016, Steve, Update, SUS, ETMX jumps 
| |
Tue Jun 14 15:55:17 2016, ericq, Update, SUS, ETMX watch
| |
Tue Jun 14 16:53:16 2016, rana, Update, SUS, ETMX watch
| |
Thu Jun 16 11:10:17 2016, Steve, Update, SUS, spare ETMX optics preparation to be hanged
| |
Tue Jun 28 09:14:27 2016, Steve, Update, SUS, ETMX optics preparation to be rehanged
| |
Wed Jun 29 08:20:04 2016, Steve, Update, SUS, First Contact shelf life
| |
Wed Jun 29 14:32:22 2016, Steve, Update, SUS, how to remove epoxy from optics
| |
Wed Jun 29 16:02:29 2016, Steve, Update, SUS, ETMX beam baffle
| |
Thu Jun 30 10:03:16 2016, Steve, Update, SUS, how to remove epoxy from optics
| |
Thu Jun 30 14:31:02 2016, Chemistry, Update, SUS, NO
| |
Tue Jul 5 09:25:31 2016, Steve, Update, SUS, how to remove epoxy from optics
| |
Thu Jul 7 09:13:54 2016, Steve, Update, SUS, SOS gluing fixture
|
|
|
Message ID: 12187
Entry time: Thu Jun 16 11:10:17 2016
In reply to: 12177
Reply to this: 12218
12264
|
| Author: |
Steve |
| Type: |
Update |
| Category: |
SUS |
| Subject: |
spare ETMX optics preparation to be hanged |
|
|
|
D Location
Number on
Drawing
|
Component
Name
|
Baked Clean
Pieces Needed
|
Pieces
In Stock
(on tower )
|
Notes |
| |
|
|
|
|
| 31,20,19,13 |
viton tips |
|
not cut yet |
baked material in stock |
| 30 |
6-32x0.75" stops |
4 |
(4) |
|
| 29 |
steel music wire 0.017" |
not baked |
on roll |
needs good wipes |
| 28 |
1/4 "washer |
4 |
(4) |
|
| 27 |
lock washer |
4 |
50 |
install |
| 26 |
Ag plated 1/4-20x1.25 |
4 |
(4) |
|
| 25 |
Ag plated1/4-25x.75 & not plated |
20 |
(20) |
|
| 24 |
SS 4-40x.5 |
2 |
(2) |
|
| 23 |
SS 4-40x.38 |
4 |
(4) |
|
| 22 |
spring plunger |
4+2 |
(4+2) |
|
| |
|
|
|
|
| |
|
|
|
|
| 18 |
magnets, 1.9mm od, length 3.2 mm |
5 |
~30 not coated, rusty |
buy Ni coated ones for future use from www.electroenergy.com
|
| 17 |
guide rod, 0.635 mm od, 3.3 mm |
3 |
6 |
Al |
| 16 |
wire standoff, 1 mm od, 4.8 mm |
2 |
2 |
Al and ruby (ruby groove not centered) |
| 15 |
short OSEMs |
5 |
6 |
|
| 14 |
spare ETMX in 40m wiki |
1 |
1 |
confirmed in cabinet |
| |
|
|
|
|
| 12 |
dumbbell standoff |
5 |
6 |
|
| 11 |
Al stiffening plate |
1 |
(1) |
|
| 10 |
wire clamp B in sus block |
2 |
(2) |
|
| 9 |
wire clamp A |
1 |
(1) |
|
| 8-7 |
lower clamp for lifting optics |
2 |
(2) |
|
| 6 |
upper clamp to hold down optic |
1 |
(1) |
|
| 5-4 |
left-right side of tower |
1 ea |
(1ea) |
|
| 3 |
tower base |
1 |
(1) |
|
| 2 |
sus block |
1 |
(1) |
|
| 1 |
lower and upper OSEM holders |
1ea |
(1ea) |
|
| |
|
|
|
|
| 48 |
sandind fixture for magnet&dumbbell |
|
|
|
| 45 |
magnet-dumbbell assemblly fixture |
1 |
1 |
|
| 43 |
guide-wirestandoff gluing fixture |
1 |
1 |
Ok for larger RUBY,
unit is not in perfect condtition but usefull
|
| |
|
|
|
|
| |
First contact |
|
3-15-2013 purchase |
Pick up FC from Gary with purchasing date 7-7-2015
or later
|
| |
FCPEEK peeler ring disk for TM cleaning |
10 front,10 back side |
have sheets only |
32&19mm ID punches ordered |
| |
GordonBrush custom for LIGO optical cleaning |
~5 |
1 (3/8wide nylonSS) |
more from Calum available |
| |
EP30-2 epoxy |
have |
have |
expiration date 9-24-2016 |
NOT finished, last edited 7-7 |
|
|
|
|
|