40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
40m Log |
Not logged in |
 |
|
Thu Dec 17 01:55:16 2015, ericq, Update, LSC, Uncooperative AUX X
|
Fri Dec 18 17:37:04 2015, rana, Update, LSC, Uncooperative AUX X
|
Mon Dec 21 02:29:49 2015, ericq, Update, LSC, AUX X RIN measurements
|
Tue Jan 5 02:54:38 2016, ericq, Update, LSC, AUX X Freq Noise attempt
|
Tue Jan 5 13:17:06 2016, rana, Update, LSC, AUX X Freq Noise attempt
|
Tue Jan 5 16:33:45 2016, ericq, Update, LSC, AUX X Freq Noise attempt
|
Thu Jan 7 04:28:39 2016, ericq, Update, LSC, AUX X Freq Noise measured 
|
Thu Jan 7 16:52:32 2016, ericq, Update, LSC, AUX X Freq Noise measured 
|
Thu Jan 7 19:04:25 2016, Koji, Update, LSC, AUX X Freq Noise measured
|
Fri Jan 8 14:47:33 2016, ericq, Update, LSC, AUX Y Freq Noise measured 
|
Fri Jan 8 20:02:49 2016, rana, Update, LSC, AUX Y Freq Noise measured
|
Sat Jan 9 00:39:15 2016, gautam, Update, LSC, AUX Y Freq Noise re-measured
|
Mon Jan 11 19:01:56 2016, gautam, Update, LSC, PLL Marconi Investigation 6x
|
Tue Jan 12 03:03:55 2016, ericq, Update, LSC, Frequently making noise
|
Tue Jan 12 19:38:31 2016, gautam, Update, LSC, Frequently making noise    
|
|
Message ID: 11920
Entry time: Thu Jan 7 19:04:25 2016
In reply to: 11919
Reply to this: 11921
|
Author: |
Koji |
Type: |
Update |
Category: |
LSC |
Subject: |
AUX X Freq Noise measured |
|
|
The next step is to compare this data with the same measurement with the PSL and the AUX laser on the PSL table (or the end Y laser). If these show a lot lower noise level, we can say 1) the x-end laser is malfunctioning and 2) the y-end and AUX laser on the PSL are well low noise. |