40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Mon Feb 2 16:58:56 2015, manasa, Update, General, RF amplifier for ALS ALSXY_outLoop.png
    Reply  Tue Feb 3 16:43:48 2015, manasa, Update, General, RF amplifier for ALS 
       Reply  Wed Feb 4 21:05:24 2015, manasa, Update, General, RF amplifier for ALS RFampBox.png
          Reply  Fri Feb 13 19:41:13 2015, ericq, Update, General, RF amplifier for ALS 
             Reply  Sat Feb 14 00:42:02 2015, Koji, Update, General, RF amplifier for ALS 
             Reply  Thu Mar 5 11:18:28 2015, manasa, Update, General, RF amplifier box 
Message ID: 11026     Entry time: Fri Feb 13 19:41:13 2015     In reply to: 10977     Reply to this: 11027   11101
Author: ericq 
Type: Update 
Category: General 
Subject: RF amplifier for ALS 

As Koji found one of the spare channels of the ALS/FOL RF amplifier box nonfunctional yesterday, I pulled it out to fix it. I found that one of the sma cables did not conduct.

It was replaced with a new cable from Koji. Also, I rearranged the ports to be consistent across the box, and re-labeled with the gains I observed. 

It has been reinstalled, and the Y frequency counter that is using one of the channels shows a steady beat freq.

I cannot test the amplitude of the green X beat at this time, as Koji is on the PSL table with the PSL shutter closed, and is using the control room spectrum analyzer. However, the dataviewer trace for the fine_phase_out_Hz looks like free swinging cavity motion, so its probably ok.

ELOG V3.1.3-