40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Jul 3 16:28:38 2014, Nichin, Update, Electronics, RF cables installed AS55_03-07-2014_162634.pdf
    Reply  Mon Jul 7 10:35:43 2014, Jenne, Update, Electronics, RF PDs needed 
       Reply  Mon Jul 7 17:20:09 2014, Nichin, Update, Electronics, RF PDs needed 
    Reply  Mon Jul 7 16:52:02 2014, manasa, Update, Electronics, RF cables need to be rerouted 
       Reply  Mon Jul 7 18:38:27 2014, Nichin, Update, Electronics, RF cables rerouted 1.png2.png
          Reply  Mon Jul 7 22:07:29 2014, rana, Update, Electronics, RF cables rerouted Untitled.pdf
          Reply  Tue Jul 15 12:36:17 2014, Nichin, Update, Electronics, RF cables rerouted 
Message ID: 10133     Entry time: Mon Jul 7 10:35:43 2014     In reply to: 10128     Reply to this: 10143
Author: Jenne 
Type: Update 
Category: Electronics 
Subject: RF PDs needed 

Quote:

 REFL33, AS55, REFL55,REFL165,REFL11,POX11,POP22

There were quite a few more demodulator units labelled with PD names. Do any of them need to be included in the automated frequency response measurement system? Please let me know so that I can include them to the RF switch and check them for proper illumination, which i will do for all the above PDs next week.

 In the order that makes more sense to me, it looks like you have:

REFL11, REFL33, REFL55, REFL165,

AS55

POX11

POP22

We don't really need POP22 right now, although we do want the facility to do both POP22 and POP110 for when we (eventually) put in a better PD there.  Also, we want cabling for POP55, so that we can illuminate it after we re-install it.  If we're working on 2f PDs, we might as well consider AS110 also, although I don't know that there was a fiber layed for it.  The big one that you're missing is POY11.

ELOG V3.1.3-