40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  TCS elog  Not logged in ELOG logo
Entry  Tue May 4 13:35:13 2010, Aidan, Computing, Hartmann sensor, Hartmann temperature channels in frame builder 
    Reply  Mon Feb 28 17:33:07 2011, Aidan, Computing, Hartmann sensor, Hartmann Seidel abberation channels in frame builder 
Message ID: 29     Entry time: Tue May 4 13:35:13 2010     Reply to this: 114
Author: Aidan 
Type: Computing 
Category: Hartmann sensor 
Subject: Hartmann temperature channels in frame builder 

 I've added the digitizer and sensor board temperature readings from the HWS to the frames. This was done in the following way

1. Create a new file /cvs/cds/caltech/chans/daq/C4TCS.ini - with the channels in it - see below

2.  open /cvs/cds/caltech/target/fb1/master

3. add a line that includes the C4TCS.ini file when the frame builder starts

4. restart frame-builder by killing the daq daemon - kill <process id for daqd> (this is the only thing that needs to be entered as it will automatically restart)

 

C4TCS.ini

 

[default]

dcuid=4

datarate=16

gain=1.0

acquire=1

ifoid=0

datatype=4

slope=1.0

offset=0

units=NONE

 

 

 

[C4:TCS-HWS_TEMP_SENSOR]

[C4:TCS-HWS_TEMP_DIGITIZER]


 

 

 

ELOG V3.1.3-