40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  SUS Lab eLog  Not logged in ELOG logo
Message ID: 671     Entry time: Tue Jul 16 22:37:22 2013
Author: Giorgos 
Type: DailyProgress 
Category: SUS 
Subject: HE & Coils Boxes: Labeling and Power Lines for Fit-through Boards 

Progress on HE & Coil Boxes

I used the labeling device to print labels for the HE sensors and coils' boxes. We use medium font and line spacing of 1.

I screwed the boards and panels together and prepared power lines for the coils' box; we have 10 boards (7 for the actuator coils and 3 for the DC magnetic field offset), each with an input and output, so I made 20 power lines. For the connections on the fit-through board, we follow the same order as the physical setup:

fit_through_boards_for_coils_HE_and_SG.eps

 We use A's for the input and B's for the output signal on the fit-through board. 

Tomorrow

Tomorrow, we will test our HE and Coils' boxes and see whether they work. We are still waiting for some front panels and some missing components to complete our circuits (such asholders and resistors for the coils' boards)

ELOG V3.1.3-