40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  SUS Lab eLog  Not logged in ELOG logo
Message ID: 648     Entry time: Tue Jun 25 22:26:03 2013
Author: Giorgos 
Type: DailyProgress 
Category: SUS 
Subject: Rare Panel Design and Mechanical Set-up 

Today, we started designing the box that will hold all of our circuits.

Particularly, we used a software (Front Panel Designer) to design where to drill the holes on the front and rare panels of our box for our wires to pass through; we will order the designs from a company. Our designs had to be very precise for the plugs and connectors on the PCB boards to fit through the holes.

1.jpg

In the afternoon, we drilled holes on the bottom panel of our box for the "amplifying" PCB boards. At the end of the day, we were almost ready with the amplifying boards. Now, we need to order more spacers and screw the PCB boards on the box.

2.jpg

ELOG V3.1.3-