40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  SUS Lab eLog  Not logged in ELOG logo
Entry  Thu May 5 21:39:07 2011, tara,ryan, Things to Buy, Blades, blade holding block base.PDFpillar.PDF
    Reply  Mon May 9 22:25:26 2011, tara,ryan, mingyuan, Things to Buy, Blades, blade holding block IMG_1554.JPG
       Reply  Tue May 10 16:59:36 2011, tara,ryan, mingyuan, Things to Buy, Blades, blade holding block base.PDFpillar.PDFedge_bottom.PDFtop_edge.PDFclampAssem.PDF
          Reply  Wed May 11 22:42:28 2011, tara,ryan, mingyuan, Things to Buy, Blades, blade holding block 
Message ID: 200     Entry time: Wed May 11 22:42:28 2011     In reply to: 197
Author: tara,ryan, mingyuan 
Type: Things to Buy 
Category: Blades 
Subject: blade holding block 

We submitted the drawing to the machine shop today. The works should be done before May 23rd.

 

   The base/ pillar/ blade clamp will be made from stainless steel. The knife edge pieces and mirror mount at the blade tip will be made from aluminum.

 

ELOG V3.1.3-