40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  SUS Lab eLog  Not logged in ELOG logo
Entry  Sat Oct 20 00:38:43 2018, Duo, HowTo, , DAC Noise monitor PCB layers 
    Reply  Tue Oct 23 00:57:13 2018, Duo, HowTo, , DAC Noise monitor PCB layers NoiseMonitor.pdf
       Reply  Wed Oct 24 15:01:50 2018, Duo, HowTo, , DAC Noise monitor PCB layers NoiseMonitor.pdf
          Reply  Wed Oct 24 21:55:45 2018, Duo, HowTo, , DAC Noise monitor PCB layers NoiseMonitor.pdf
Message ID: 1771     Entry time: Wed Oct 24 21:55:45 2018     In reply to: 1770
Author: Duo 
Type: HowTo 
Category:  
Subject: DAC Noise monitor PCB layers 

I forgot to connect the outputs of U1 and U2. It is fixed. I also run the design rule check and verified that all the connections are made. I separated the power ground and signal ground as well. The summary PDF is updated below.

Attachment 1: NoiseMonitor.pdf  557 kB  Uploaded Wed Oct 24 23:12:55 2018  | Hide | Hide all
NoiseMonitor.pdf NoiseMonitor.pdf NoiseMonitor.pdf
ELOG V3.1.3-