40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Entry  Tue Sep 14 15:17:03 2021, Stephen, DailyProgress, Cryo vacuum chamber, Chamber up to air, lids removed 
    Reply  Wed Sep 15 08:22:32 2021, Aidan, DailyProgress, Cryo vacuum chamber, CONTAMINATION: Black paint flecks throughout chamber IMG_4686.jpgIMG_4687.jpgIMG_4689.jpgIMG_4690.jpg
Message ID: 2667     Entry time: Wed Sep 15 08:22:32 2021     In reply to: 2665
Author: Aidan 
Type: DailyProgress 
Category: Cryo vacuum chamber 
Subject: CONTAMINATION: Black paint flecks throughout chamber 

I was setting up for some characterization measurements of the JPL PD and I noticed that there are flecks of black paint all through the chamber. There were a couple of visible bare sections on the wall of the inner shield where paint had been removed.

Quote:

Monday I completed the vent that Aidan had started by turning off the cryocooler. During the afternoon I turned off the pumps, unbolted the chamber lid, and removed the radiation shield lids.

Next, Aidan was going to run some characterization measurements and determine whether to swap the diode or repeat with A1.

 

Attachment 1: IMG_4686.jpg  1.064 MB  Uploaded Wed Sep 15 09:25:43 2021  | Hide | Hide all
IMG_4686.jpg
Attachment 2: IMG_4687.jpg  1.169 MB  Uploaded Wed Sep 15 09:25:52 2021  | Hide | Hide all
IMG_4687.jpg
Attachment 3: IMG_4689.jpg  1012 kB  Uploaded Wed Sep 15 09:26:00 2021  | Hide | Hide all
IMG_4689.jpg
Attachment 4: IMG_4690.jpg  992 kB  Uploaded Wed Sep 15 09:26:09 2021  | Hide | Hide all
IMG_4690.jpg
ELOG V3.1.3-